Solution Description
Item Application
GCS conveyor pully is produced as for every buyer requirement, with major design unfer national standard, good quality inspection concentrating on shaft main, welded joint, rubber material and hardness, dynamic stability and so on for for a longer time solution life span.
Item Characteristics:
Conveyor Pulley is the main transmission belt conveyor components, there are two kinds of driveroller and the bend pulley, driving pulley may be made upon request, smooth or castrubber tread surface.
1 . Straightforward installation and good flexibility
two . Strong force of friction, low vibration
3 . Dust-proof and h2o-proof, the two acid and alkali have no impact to our conveyor pulley
4 . Wonderful welding technique ensures roller with reduced vibration and sounds
five . Strict inspection regular makes certain our high top quality processing
six. Stable running and min 50,000 hrs normal life time.
Technical Parameters: (The diameter can be created as requires.)
Driving Pulley (rubber floor) | |
Belt Width | Regular Diameter of Pulley |
500 mm | 500mm |
650 mm | 500mm,630 mm |
800 mm | 500mm,630mm,800mm,1000mm,1250mm,1400 mm |
a thousand mm | 630mm,800mm,1000mm,1250mm,1400 mm |
1200 mm | 630mm,800mm,1000mm,1250mm,1400 mm |
1400 mm | 630mm,800mm,1000mm,1250mm,1400 mm |
1600 mm | 630mm,800mm,1000mm,1250mm,1400 mm |
1800 mm | 630mm,800mm,1000mm,1250mm,1400 mm |
2000 mm | 800mm,1000mm,1250mm,1400 mm |
2200 mm | 1000mm,1250mm,1400 mm |
2400 mm | 1000mm,1250mm,1400 mm |
Bend Pulley (smooth surface & rubber surface) | |
Belt Width | Common Diameter of Pulley (mm) |
five hundred mm | 250,315,four hundred,500 |
650 mm | 250,315,400,500,630 |
800 mm | 250,315,four hundred,five hundred,630,800,1000,1250 |
a thousand mm | 250,315,400,five hundred,630,800,a thousand,1250,1400 |
1200 mm | 250,315,four hundred,five hundred,630,800,one thousand,1250,1400 |
1400 mm | 315,400,five hundred,630,800,1000,1250,1400 |
1600 mm | 400,five hundred,630,800,1000,1250,1400 |
1800 mm | 400,500,630,800,1000,1250,1400 |
2000 mm | 500,630,800,1000,1250,1400 |
2200 mm | 630,800,1000,1250,1400 |
2400 mm | 800,a thousand,1250,1400 |
In a twin pulley program, this ratio is equivalent to the reference diameter of the output pulley being higher than the reference diameter of the input pulley. It really is fairly straightforward as long as you determine the gear ratios for a far more complex pulley method action by stage. For numerous pulleys, the ratios of the various parts of the system must be calculated to figure out the total ratio. In the photograph over, the reference diameter of the decrease drive wheel is 20mm, the radius of the upper wheel is 40mm, and the ratio is 2:1. 2 spins on the decrease wheel and 1 spin on the upper wheel. The gear ratio also tells us something about the torque of the program simply because the ratio of output torque to input torque is equal to the gear ratio. For that reason, the torque used to the upper wheel is twice as fast, but the speed is halved.